The process of PVC plastic particle processing We have encountered a common problem is the color of the particles, the stability of the color, is the problem that PVC plastic particle processing needs to solve. What are the reasons for the instability of plastic particle processing? Is the temperature of the injection molding machine used for processing the cause of the impact?
1. First of all, it is necessary to check the temperature of the injection molding machine. The color is unstable. It is related to the temperature of the injection molding machine. Therefore, when processing the plastic casing, it must be checked first.
2, sometimes the back pressure is too large, the production cycle is unstable, the production cycle is unstable, and when the time is open, the color will change.
3, the mixer does not mix the toner and raw materials according to the mixing process, such as insufficient time, feeding method or the order of PVC particle feeding is inconsistent, resulting in uneven color, which is one of the reasons for color instability, so It is also important to check when processing plastic casings.
4. Because the humidity of the raw material is too large, the viscosity inside has not spread, and finally the color of the plastic processing is unstable.

5, the amount of water return material is used for a long time, which has a greater impact on light-colored injection molded parts.
6. The grades of raw materials are inconsistent. Due to the different background colors of each raw material, the color of the same toner injection molded parts will be different. Sometimes the same supplier, the batch number is different, the background color will be somewhat biased, so the product with high color deviation requirements, even to control whether the background color of each batch is consistent.
7. If the quality of the toner is too bad, it is not heat-resistant, or if the toner used in the wrong material is not suitable, the color will be unstable.
The quality of the original toner also caused the instability of the color of the plastic particle processing shell.

Wuxi Jiahong Plastic Technology Co., Ltd. has nearly 30 years of experience in research and development and granulation of modified PVC pellets. The professional technical service team can provide one-stop system solutions for customers. For more information about the product, please visit our official website: www.sdbzkt.cn, consult online customer service or call the hotline. Fixed line: 0510-68755207 Mobile: 15190220696, we will be happy to help you.

(Disclaimer: All the tutorials and resources included in this site are from the Internet, and the copyrights are owned by the original author and its website. Although this site strives to preserve the original copyright information, it may not be possible for certain reasons. For the true source, please forgive the original author! If you have any objection to the attribution of the tutorial and resources on this site, please notify Xiaobian immediately, the situation is true, we will delete it as soon as possible.)